WEBUI connect with OLM3 for LightBurn

Open the LightBurn and connect to the machine In the console: Enter the code; "$74=WIFI name" (for example: $74=ottest24g), and click Enterdisplay OK indicates the setting success Enter the code; "$75=WIFI password" (for example: $75=test1234), and then click Enter, display OK indicates the setting success. Finally, enter the code: "$WRS", and then click Enter, display OK indicates successful setting.The $WRS code is simply understood as a refresh.Refrefresh can obtain an IP address. Open the browser, enter the website bar, enter the IP address obtained above, such as "192.168.124.9", and then click Enter Enter the default account: "admin", the default password: "admin", and enter the operation interface 1.)Ggode files required to make web control engraving in LightBurn software Import the pictures that you need to engrave, and set the engraving parameters, and finally click “OK” (2)Click Save Program, save as to. End with nc suffix to U disk (this U disk is TF card on the machine) (3)Select the G-Gode file in the webUI Wait to upload... Select the file required to be engraved   As indicated, the laser module was focused.The distance after focus is the best distance between the laser module and the engraved surface Manually move the laser module to the start position of the engraving and click "Next" to the next step Set the number of engraving, generally is the default 1 times.Then click the "Start" button to the next step. 2. Click "run" to start carving 3.Thank you !

How does the Laser Explorer connect with OLM3?

Download software There are two ways for APP to connect to the machine: 1、Connect OLM3 in network mode 1.1 Start OLM3. Turn on your phone's WIFI, search for a hot spot starting with the words "Ortur Laser Master 3", click and enter the password: "12345678" to connect, but once connected to the hot spot of the machine, the phone cannot access the Internet. 1.2 If multiple OLM3 machines are started up, please input the code "$310" in the console of the computer control software, and then click Enter to view the name of the machine hotspot. 1.3After connecting the hot spot, open the software and click the position selected position in the following box to connect the machine 1.4Connect the discovered device 2、Connecting to the machine through search requires the machine and the phone to connect to the same WiFi at the same time In the console: Enter the code; "$74=WIFI name" (For example: $74=lianTong), and then click Enter. Green “✔” indicates the setting success Enter the code; "$75=WIFI password"( For example: $75=12345678), and then click Enter, and display the green“✔“is set successfully. Finally, enter the code: "$WRS", and then click Enter, showing the green ✔ indicates a successful setting.The $WRS code is simply understood as a refresh.If you do not refresh, you need to restart the machine.1.The phone is now connected to the same WIFI Open the APP search device and connect to the displayed device