Parameter Comparison

(S=Strength, 1000=100%)

  • Ortur Laser Master 2 Pro S2&Aufero Laser 2
  • Aufero Laser 1
  • Cutting
LU2-2LU2-4-LFLU2-4-SFRemark
1.6mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4.06mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
5.18mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors, Better Results.
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
150mm/min,M3,S1000
Number of passes: 1
5.96mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:2 
Cutting
100mm/min,M3,S1000
Number of passes: 1
7.85mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
【Reduce the focal length by 2-3mm during cutting】
Cutting
100mm/min,M3,S1000
Number of passes:9 
Cutting
100mm/min,M3,S1000
Number of passes:12
3.06mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
400mm/min,M3,S1000
Number of passes: 1
5.15mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
250mm/min,M3,S1000
Number of passes: 2 
8.30mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
250mm/min,M3,S1000
Number of passes: 3
Cutting
200mm/min,M3,S1000
Number of passes: 2
10mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 2
Cutting
150mm/min,M3,S1000
Number of passes:3 
6mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
100mm/min,M3,S1000
Number of passes: 1 
9mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes: 3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes: 2
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
500mm/min,M3,S1000
Number of passes: 1 
0.1mm Colored A4 Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
250g Kraft PaperEngraving
2000mm/min,M4,S100
12Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
0.7MM LeatherEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cannot cut the white one, it's transparent in fact.
5mm AcrylicEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
×Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes: 3
Tin WireMeltingMeltingMeltingCannot engrave.
Cobblestone×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Ceramic×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated MetalPaint Sprayed MetalEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated MetalEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Anodised AluminiumEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Stainless Steel×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Copper×××
Pure aluminum×××
Gold×××
Silver×××

Note:

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

LU2-2 LU2-4-LFLU2-4-SFRemark
1.6mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
6mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors, Better Results.
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
9mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes:2
Cutting
500mm/min,M3,S1000
Number of passes:1
Cutting
500mm/min,M3,S1000
Number of passes:1
0.1mm Colored A4
Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
250g Kraft PaperEngraving
2000mm/min,M4,S100
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
0.7MM LeatherEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
5mm AcrylicEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes:3 
Anodised AluminiumEngraving 2000mm/min,M4,S1000 15Lines/mmEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm

Stainless SteelEngraving 100mm/min,M4,S1000 15Lines/mmCutting
100mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cannot cut the white one, it's transparent in fact.
Tin WireMeltingMeltingMeltingCannot engrave.
CobblestoneEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
CeramicEngraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated Metal
Paint Sprayed Metal
Engraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated MetalEngraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
The Glossy finishing surface should be painted black by Marker Pen.

Note:

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

Ortur Laser Master 2 S2Ortur Laser Master 2pro S2 & Aufero Laser 2Aufero Laser 1Ortur Laser Master 3
3mm Basswood Plywood500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
5mm Basswood Plywood300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
8mm Basswood Plywood100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
10mm Basswood Plywood150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
3mm Pine Board500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
5mm Pine Board200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
8mm Pine Board100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
10mm Pine Board100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
12mm Pine Board100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
15mm Pine Board100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
19mm Pine Board100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
3mm Paulownia Plank800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
5mm Paulownia Plank300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
8mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
10mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
12mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
15mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
3mm Gray Cardboard300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
6mm Gray Cardboard200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
2mm White Cardboard400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
3mm White Cardboard300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
6mm Corrugated Board800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
5mm Black Acrylic
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
8mm Black Acrylic100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
20mm Black Acrylic100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
25mm Black Acrylic100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
30mm Black Acrylic
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
3mm PolyVinyl Chloride1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
5mm PolyVinyl Chloride700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
7mm PolyVinyl Chloride200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
1.5mm Leather300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
2mm Leather300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1

Notice:

1. The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

2. It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

Material Parameter Reference of OLM3 for LU2-10A for LaserGRBL

Cutting

ApplicationBrightnessContrastWhite ClipConversion ToolEngraving SpeedLaser ModeS-MinS-MaxCutting TimesReference Picture
3mm Basswood PlywoodCutting1001000Voctorize500M3010001view more
5mm Basswood PlywoodCutting1001000Voctorize300M3010001view more
8mm Basswood PlywoodCutting1001000Voctorize100M3010001view more
10mm Basswood PlywoodCutting1001000Voctorize150M3010008view more
3mm Pine BoardCutting1001000Voctorize500M3010001view more
5mm Pine BoardCutting1001000Voctorize200M3010001view more
8mm Pine BoardCutting1001000Voctorize100M3010001view more
10mm Pine BoardCutting1001000Voctorize100M3010002view more
12mm Pine BoardCutting1001000Voctorize100M3010003view more
15mm Pine BoardCutting1001000Voctorize100M3010005view more
19mm Pine BoardCutting1001000Voctorize100M3010008view more
3mm Paulownia PlankCutting1001000Voctorize800M3010001view more
5mm Paulownia PlankCutting1001000Voctorize300M3010001view more
8mm Paulownia PlankCutting1001000Voctorize200M3010001view more
10mm Paulownia PlankCutting1001000Voctorize200M3010004view more
12mm Paulownia PlankCutting1001000Voctorize200M3010005view more
15mm Paulownia PlankCutting1001000Voctorize200M3010006view more
3mm Gray CardboardCutting1001000Voctorize300M3010001view more
6mm Gray CardboardCutting1001000Voctorize200M3010005view more
2mm White CardboardCutting1001000Voctorize400M3010001view more
3mm White CardboardCutting1001000Voctorize300M3010001view more
6mm Corrugated BoardCutting1001000Voctorize800M3010001view more
5mm Black AcrylicCutting1001000Voctorize100M3010003view more
8mm Black AcrylicCutting1001000Voctorize100M3010004view more
20mm Black AcrylicCutting1001000Voctorize100M30100011view more
25mm Black AcrylicCutting1001000Voctorize100M30100015view more
30mm Black AcrylicCutting1001000Voctorize100M30100017view more
3mm PolyVinyl ChlorideCutting1001000Voctorize1000M3010001view more
5mm PolyVinyl ChlorideCutting1001000Voctorize700M3010001view more
7mm PolyVinyl ChlorideCutting1001000Voctorize200M3010001view more
1.5mm LeatherCutting1001000Voctorize300M3010001view more
2mm LeatherCutting1001000Voctorize300M3010001view more

Material Parameter Reference of OLM3 for LU2-10A for LaserGRBL

Engraving

ApplicationBrightnessContrastWhite ClipConversion ToolDirectionQualityEngraving SpeedLaser ModeS-MinS-MaxReference Picture
Basswood PlywoodEngraving1001000Line to Line TracingHorizontal10 Lines/mm15000 mm/MinM401000view more
Pine BoardEngraving1001000Line to Line TracingHorizontal15 Lines/mm20000 mm/MinM401000view more
Paulownia BoardEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40700view more
Gray CardboardEngraving1001000Line to Line TracingHorizontal15 Lines/mm20000 mm/MinM40700view more
White CardboardEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM401000view more
Corrugated BoardEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40700view more
Black AcrylicEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM401000view more
Acrylonitrile-Butadiene-StyreneEngraving1001000Line to Line TracingHorizontal10 Lines/mm10000 mm/MinM401000view more
Epoxy BoardEngraving1001000Line to Line TracingHorizontal10 Lines/mm10000 mm/MinM401000view more
PolyVinyl ChlorideEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40600view more
LeatherEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40600view more
Cork CoasterEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40700view more
Stainless NameplateEngraving1001000Line to Line TracingHorizontal10 Lines/mm5000 mm/MinM401000view more
Stainless SteelEngraving1001000Line to Line TracingHorizontal10 Lines/mm2000 mm/MinM401000view more
Scratch PaperEngraving1001000Line to Line TracingHorizontal10 Lines/mm10000 mm/MinM40150view more
Ceramics(laser color paper on it)Engraving1001000Line to Line TracingHorizontal20 Lines/mm3000 mm/MinM40250view more
Coated Metal CardEngraving1001000Line to Line TracingHorizontal10 Lines/mm3000 mm/MinM40250view more
Cowhide Leather BagEngraving1001000Line to Line TracingHorizontal10 Lines/mm20000 mm/MinM40600view more
Phone CaseEngraving1001600Line to Line TracingHorizontal10 Lines/mm5000 mm/MinM40200view more