English
Czech
Finnish
French
German
Italian
Polish
Russian
Spanish
UkrainianMaterials Reference
Laser Master 2 Pro Materials Reference
(S=Strength, 1000=100%)
| LU2-4 Cutting | LU2-4 Engraving | Remark | |
| 1.6mm Plywood Plate | Cutting 300mm/min,S1000 Run 1 pass |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| 2.8mm Plywood Plate | Cutting 100mm/min,S1000 |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| 4mm Plywood Plate | Cutting 100mm/min,S1000 |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| 7mm Pine board | Cutting 100mm/min,S1000 Run 2 passes |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| 9mm Pine board | Cutting 100mm/min,S1000 Run 3 passes |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| 0.1mm Colored A4 Paper (Not White) |
Cutting 4000mm/min,S1000 Run 2 passes |
Engraving 9000mm/min,S350 |
The white paper is non-opaque, the result is not very good. |
| 0.3mm Colored A4 Paper (Not White) |
Cutting 1000mm/min,S1000 |
Engraving 9000mm/min,S700 |
The white paper is non-opaque, the result is not very good. |
| 250g Kraft Paper | Cutting 1000mm/min,S1000 |
Engraving 9000mm/min,S500 |
Darker Colors, Better Results. |
| 3mm Paperboard (Cardboard Box) |
Cutting 300mm/min,S1000 |
Engraving 9000mm/min,S400 |
Darker Colors, Better Results. |
| 0.7mm Leather | Cutting 600mm/min,S1000 |
Engraving 10000mm/min,S1000 |
Darker Colors, Better Results. |
| Non-woven fabrics (0.5mm, Dark Color) |
Cutting 2300mm/min,S1000 |
N/A | Cannot cut the white one, it's transparent in fact. |
| Some Plastic Sheet (Dark Color) |
Engraving 3000mm/min,S600 |
N/A | Some plastic sheets may be melt. |
| 5mm Acrylic | Cutting 100mm/min,S1000 Run 3 passes |
Engraving 10000mm/min,S1000 |
Need coat the dark color paper onto the transparent Acrylic plate. |
| Tin Wire | Melting | N/A | Cannot engrave. |
| Cobblestone | Engraving 100mm/min,S1000 |
N/A | Need coated with acrylic dye heat transfer film. |
| Ceramic | Engraving 100mm/min,S1000 |
N/A | Need coated with acrylic dye heat transfer film. |
| Powder Coated Metal Paint Sprayed Metal |
Engraving 10000mm/min,S1000 |
N/A | Engraved in the layer of powder coating. |
| Plated Metal | Engraving 100mm/min,S1000 |
N/A | It's the surface color turned to be other color. The Glossy finishing surface should be painted black by Marker Pen. |
| Anodized Aluminium | Engraving 10000mm/min,S1000 |
N/A | |
| Stainless Steel | Engraving 100mm/min,S1000 |
N/A | |
| Copper | Engraving 100mm/min,S1000 |
N/A | |
|
The results would be different in even the same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest. It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, some materials in white color or previous to light, etc. Then, you need to use the marker pen to black it to engrave. |
|||
Aufero Laser 1 Materials Reference
(S=Strength, 1000=100%)
| LU2-2 | LU2-4 LF | LU2-4 SF | Remark | |
| 1.6mm Plywood Plate | Engraving 2000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 400mm/min,M3,S1000 Number of passes: 1 |
Cutting 300mm/min,M3,S1000 Number of passes: 1 |
|||
| 2.8mm Plywood Plate | Engraving 2000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 150mm/min,M3,S1000 Number of passes: 1 |
Cutting 100mm/min,M3,S1000 Number of passes: 1 |
|||
| 4mm Plywood Plate | Engraving 2000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 130mm/min,M3,S1000 Number of passes: 1 |
Cutting 100mm/min,M3,S1000 Number of passes: 1 |
|||
| 6mm Pine board | Engraving 2000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 150mm/min,M3,S1000 Number of passes: 1 |
Cutting 100mm/min,M3,S1000 Number of passes: 1 |
|||
| 9mm Pine board | Engraving 2000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Engraving 3000mm/min,M4,S500 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 100mm/min,M3,S1000 Number of passes: 3 |
Cutting 100mm/min,M3,S1000 Number of passes: 3 |
|||
| 3mm Paperboard (Cardboard Box) |
Engraving 3000mm/min,M4,S1000 12Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 200mm/min,S1000 Number of passes: 2 |
Cutting 500mm/min,M3,S1000 Number of passes: 1 |
Cutting 500mm/min,M3,S1000 Number of passes: 1 |
||
| 0.1mm Colored A4 Paper (Not White) |
Engraving 3000mm/min,M4,S600 12Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
The white paper is nonopaque, the result is not very good. |
| Cutting 1500mm/min,M3,S1000 Number of passes: 1 |
Cutting 3000mm/min,M3,S1000 Number of passes: 1 |
Cutting 3000mm/min,M3,S1000 Number of passes: 1 |
||
| 250g Kraft Paper | Engraving 2000mm/min,M4,S100 12Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
Engraving 3000mm/min,M4,S300 15Lines/mm |
Darker Colors, Better Results. |
| Cutting 200mm/min,M3,S1000 Number of passes: 1 |
Cutting 1000mm/min,M3,S1000 Number of passes: 1 |
Cutting 1000mm/min,M3,S1000 Number of passes: 1 |
||
| 0.7MM Leather | Engraving 3000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S600 15Lines/mm |
Engraving 3000mm/min,M4,S600 15Lines/mm |
|
| Cutting 100mm/min,M3,S1000 Number of passes: 1 |
Cutting 800mm/min,M3,S1000 Number of passes: 1 |
Cutting 800mm/min,M3,S1000 Number of passes: 1 |
||
| Non-woven fabrics (0.5mm, Dark Color) |
Cutting 500mm/min,M3,S1000 Number of passes: 1 |
Cutting 1500mm/min,M3,S1000 Number of passes: 1 |
Cutting 1500mm/min,M3,S1000 Number of passes: 1 |
Cannot cut the white one, it's transparent in fact. |
| 5mm Acrylic | Engraving 2000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
Need coat the dark color paper onto the transparent Acrylic plate. |
| N/A | Cutting 100mm/min,M3,S1000 Number of passes: 2 |
Cutting 100mm/min,M3,S1000 Number of passes: 3 |
||
| Tin Wire | Melting | Melting | Melting | Cannot engrave. |
| Cobblestone | N/A | Engraving 100mm/min,M4,S1000 15Lines/mm |
Engraving 100mm/min,M4,S1000 15Lines/mm |
Need coated with acrylic dye heat transfer film. |
| Ceramic | N/A | Engraving 100mm/min,M4,S1000 15Lines/mm |
Engraving 100mm/min,M4,S1000 15Lines/mm |
Need coated with acrylic dye heat transfer film. |
| Powder Coated Metal Paint Sprayed Metal |
Engraving 2000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
Engraved in the layer of powder coating. |
| Plated Metal | Engraving 100mm/min,M4,S1000 15Lines/mm |
Engraving 100mm/min,M4,S1000 15Lines/mm |
Engraving 100mm/min,M4,S1000 15Lines/mm |
It's the surface color turned to be other color. The Glossy finishing surface should be painted black by Marker Pen. |
| Anodised Aluminium | Engraving 2000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
Engraving 3000mm/min,M4,S1000 15Lines/mm |
|
| Stainless Steel | N/A | Engraving 100mm/min,M4,S1000 15Lines/mm |
Engraving 100mm/min,M4,S1000 15Lines/mm |
|
|
The results would be different in even the same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest. It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, some materials in white color or previous to light, etc. Then, you need to use the marker pen to black it to engrave. |
||||