Parameter Comparison

(S=Strength, 1000=100%)

  • Ortur Laser Master 2 Pro S2&Aufero Laser 2
  • Aufero Laser 1
  • Engraving
  • Cutting
LU2-2LU2-4-LFLU2-4-SFRemark
1.6mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4.06mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
5.18mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors, Better Results.
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
150mm/min,M3,S1000
Number of passes: 1
5.96mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:2 
Cutting
100mm/min,M3,S1000
Number of passes: 1
7.85mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
【Reduce the focal length by 2-3mm during cutting】
Cutting
100mm/min,M3,S1000
Number of passes:9 
Cutting
100mm/min,M3,S1000
Number of passes:12
3.06mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
400mm/min,M3,S1000
Number of passes: 1
5.15mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
250mm/min,M3,S1000
Number of passes: 2 
8.30mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
250mm/min,M3,S1000
Number of passes: 3
Cutting
200mm/min,M3,S1000
Number of passes: 2
10mm Tung wood boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 2
Cutting
150mm/min,M3,S1000
Number of passes:3 
6mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
100mm/min,M3,S1000
Number of passes: 1 
9mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes: 3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes: 2
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
500mm/min,M3,S1000
Number of passes: 1 
0.1mm Colored A4 Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
250g Kraft PaperEngraving
2000mm/min,M4,S100
12Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
0.7MM LeatherEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cannot cut the white one, it's transparent in fact.
5mm AcrylicEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
×Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes: 3
Tin WireMeltingMeltingMeltingCannot engrave.
Cobblestone×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Ceramic×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated MetalPaint Sprayed MetalEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated MetalEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Anodised AluminiumEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Stainless Steel×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Copper×××
Pure aluminum×××
Gold×××
Silver×××

Note:

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

LU2-2 LU2-4-LFLU2-4-SFRemark
1.6mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4mm Plywood PlateEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
6mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors, Better Results.
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
9mm Pine boardEngraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes:2
Cutting
500mm/min,M3,S1000
Number of passes:1
Cutting
500mm/min,M3,S1000
Number of passes:1
0.1mm Colored A4
Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
250g Kraft PaperEngraving
2000mm/min,M4,S100
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
0.7MM LeatherEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
5mm AcrylicEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes:3 
Anodised AluminiumEngraving 2000mm/min,M4,S1000 15Lines/mmEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm

Stainless SteelEngraving 100mm/min,M4,S1000 15Lines/mmCutting
100mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cannot cut the white one, it's transparent in fact.
Tin WireMeltingMeltingMeltingCannot engrave.
CobblestoneEngraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
CeramicEngraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated Metal
Paint Sprayed Metal
Engraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated MetalEngraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
The Glossy finishing surface should be painted black by Marker Pen.

Note:

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

      Ortur Laser Master 2 S2Ortur Laser Master 2pro S2&Aufero Laser 2Aufero Laser 1Ortur Laser Master 3
Basswood Plywood10000mm/min,M4,S500
10Lines/mm
10000mm/min,M4,S500 10Lines/mm3000mm/min,M4,S250 10Lines/mm15000mm/min,M4,S1000 10Lines/mm
Pine Board3000mm/min,M4,S200 20Lines/mm10000mm/min,M4,S500 10Lines/mm3000mm/min,M4,S250 15Lines/mm 20000mm/min,M4,S1000 15Lines/mm
Paulownia Board3000mm/min,M4,S200 10Lines/mm
5000mm/min,M4,S250 10Lines/mm3000mm/min,M4,S100 10Lines/mm20000mm/min,M4,S700 10Lines/mm
Gray Cardboard3000mm/min,M4,S200 15Lines/mm10000mm/min,M4,S500 15Lines/mm3000mm/min,M4,S250 10Lines/mm20000mm/min,M4,S700 15Lines/mm
White Cardboard10000mm/min,M4,S1000 10Lines/mm10000mm/min,M4,S1000 10Lines/mm3000mm/min,M4,S250 15Lines/mm20000mm/min,M4,S1000 10Lines/mm
Corrugated Board10000mm/min,M4,S500 10Lines/mm10000mm/min,M4,S500 10Lines/mm3000mm/min,M4,S150 10Lines/mm20000mm/min,M4,S700 10Lines/mm
Black Acrylic10000mm/min,M4,S500 15Lines/mm10000mm/min,M4,S500 15Lines/mm3000mm/min,M4,S250 10Lines/mm20000mm/min,M4,S1000 10Lines/mm
Acrylonitrile-Butadiene-Styrene10000mm/min,M4,S1000 15Lines/mm10000mm/min,M4,S1000 15Lines/mm3000mm/min,M4,S250 10Lines/mm10000mm/min,M4,S1000 10Lines/mm
Epoxy Board3000mm/min,M4,S200 15Lines/mm10000mm/min,M4,S500 15Lines/mm3000mm/min,M4,S250 10Lines/mm10000mm/min,M4,S1000 10Lines/mm
PolyVinyl Chloride5000mm/min,M4,S250 10Lines/mm5000mm/min,M4,S250 10Lines/mm3000mm/min,M4,S150 10Lines/mm20000mm/min,M4,S600 10Lines/mm
Leather10000mm/min,M4,S500 10Lines/mm
10000mm/min,M4,S500 10Lines/mm
3000mm/min,M4,S200 10Lines/mm
20000mm/min,M4,S600 10Lines/mm
Cork Coaster3000mm/min,M4,S250 10Lines/mm5000mm/min,M4,S250 10Lines/mm3000mm/min,M4,S250 10Lines/mm20000mm/min,M4,S700 10Lines/mm
Stainless Nameplate10000mm/min,M4,S1000 20Lines/mm10000mm/min,M4,S1000 20Lines/mm3000mm/min,M4,S250 20Lines/mm5000mm/min,M4,S1000 10Lines/mm
Stainless Steel3000mm/min,M4,S250 20Lines/mm10000mm/min,M4,S1000 20Lines/mm1000mm/min,M4,S250 20Lines/mm2000mm/min,M4,S1000 10Lines/mm
Scratch Paper10000mm/min,M4,S150 10Lines/mm10000mm/min,M4,S150 10Lines/mm1000mm/min,M4,S150 10Lines/mm10000mm/min,M4,S150 10Lines/mm
Ceramics(laser color paper on it)3000mm/min,M4,S250 20Lines/mm10000mm/min,M4,S1000 20Lines/mm5000mm/min,M4,S100 10Lines/mm3000mm/min,M4,S250 20Lines/mm
Coated Metal Card3000mm/min,M4,S250 10Lines/mm10000mm/min,M4,S500 10Lines/mm5000mm/min,M4,S250 10Lines/mm3000mm/min,M4,S250 10Lines/mm
Cowhide Leather Bag10000mm/min,M4,S100 20Lines/mm10000mm/min,M4,S100 20Lines/mm3000mm/min,M4,S100 10Lines/mm20000mm/min,M4,S600 10Lines/mm
Phone Case10000mm/min,M4,S500 20Lines/mm10000mm/min,M4,S500 20Lines/mm3000mm/min,M4,S250 10Lines/mm5000mm/min,M4,S200 10Lines/mm

Notice:

1. The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

2. It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

Ortur Laser Master 2 S2Ortur Laser Master 2pro S2 & Aufero Laser 2Aufero Laser 1Ortur Laser Master 3
3mm Basswood Plywood500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
5mm Basswood Plywood300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
8mm Basswood Plywood100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
10mm Basswood Plywood150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
150mm/min, M3, S1000
Number of passes: 8
3mm Pine Board500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
500mm/min, M3, S1000
Number of passes: 1
5mm Pine Board200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
8mm Pine Board100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
100mm/min, M3, S1000
Number of passes: 1
10mm Pine Board100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
100mm/min, M3, S1000
Number of passes: 2
12mm Pine Board100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
15mm Pine Board100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
100mm/min, M3, S1000
Number of passes: 5
19mm Pine Board100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
100mm/min, M3, S1000
Number of passes: 8
3mm Paulownia Plank800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
5mm Paulownia Plank300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
8mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
10mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
200mm/min, M3, S1000
Number of passes: 4
12mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
15mm Paulownia Plank200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
200mm/min, M3, S1000
Number of passes: 6
3mm Gray Cardboard300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
6mm Gray Cardboard200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
200mm/min, M3, S1000
Number of passes: 5
2mm White Cardboard400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
400mm/min, M3, S1000
Number of passes: 1
3mm White Cardboard300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
6mm Corrugated Board800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
800mm/min, M3, S1000
Number of passes: 1
5mm Black Acrylic
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
100mm/min, M3, S1000
Number of passes: 3
8mm Black Acrylic100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
100mm/min, M3, S1000
Number of passes: 4
20mm Black Acrylic100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
100mm/min, M3, S1000
Number of passes: 11
25mm Black Acrylic100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
100mm/min, M3, S1000
Number of passes: 15
30mm Black Acrylic
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
100mm/min, M3, S1000
Number of passes: 17
3mm PolyVinyl Chloride1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
1000mm/min, M3, S1000
Number of passes: 1
5mm PolyVinyl Chloride700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
700mm/min, M3, S1000
Number of passes: 1
7mm PolyVinyl Chloride200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
200mm/min, M3, S1000
Number of passes: 1
1.5mm Leather300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
2mm Leather300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1
300mm/min, M3, S1000
Number of passes: 1

Notice:

1. The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest.

2. It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.